Standard baffle lengths are 1200mm, 1500mm and 1800mm. Baffle depths are between 150mm and 500mm. Standard width is 50mm. Bespoke baffle sizes and shapes are available on request.
Note: Individual baffles are supplied assembled ready for installation on-site. Linear baffles intended for long continuous runs are supplied loose for on-site assembly.
SAS500 and associated lighting options are available in all standard SAS finishes. Bespoke finishes are available on request.
SAS500 can be manufactured with any standard SAS perforation. Bespoke perforations are also an option.
50mm deep, 45 Kg/m3 density mineral wool pad with black tissue face. Other acoustic materials are available.
SAS500 lighting options are fully compatible with standard SAS500 baffles. Lit sections can be mounted individually or in a continuous run, with drivers external to the baffle(s).
SAS500 Light baffles are designed to deliver well balanced lit environments suitable for large spaces and central circulation areas.
The LED light source used with SAS500 will still deliver over 90% of their peak light output after 60,000 hours of operation. Electronic control gear will operate for 100,000 hours with a maximum 10% failure level.
Light modules can be accessed for maintenance from below by removing the diffuser, and easily demounted by releasing the retaining spring clips positioned in each corner.
Drivers may be replaced by unplugging the remote pack.
Emergency lighting is provided through 3-hour maintained emergency versions of the baffle light module. All emergency lighting provision calculations should be approved by a suitably qualified person.
Each individual unit is supplied with a DALI addressable and dimmable control gear. Modules with integrated emergency provision have an additional DALI addressable and reporting emergency converter.
Opal polycarbonate diffuser or glare control lens options available.
Please contact our technical team for all questions relating to bespoke features, sizes or service integration.